Verifiable specifications
Product information supported by official records
| Manufacturer model code | B112 | View source |
|---|---|---|
| Robot dimensions | Diameter 325 mm × height 80 mm | View source |
| Robot rated power | 35 W | View source |
| Robot rated voltage | 14.4 V DC | View source |
| Robot charging voltage | 20 V DC | View source |
| Rated battery capacity | 2,500 mAh rated | View source |
| Nominal battery capacity | 2,600 mAh nominal | View source |
| Charging dock model | CDZB112 | View source |
| Charging dock dimensions | 146 × 122 × 87.5 mm | View source |
| Charging dock rated input | 20 V DC, 0.6 A | View source |
| Charging dock rated output | 20 V DC, 0.6 A | View source |
Use the body dimensions without assuming clearance
The circular robot is specified as 325 mm in diameter and 80 mm high. Measure the narrowest approach and the lowest obstruction under the furniture, not just its open edge. No minimum entry clearance or obstacle-crossing height is established by the specifications used here.
Look for B112 on the robot identification label. This page covers Xiaomi’s Global E10 record; a similar-looking device or a shortened seller title is not enough to identify this model.
For Xiaomi Robot Vacuum E10, Manufacturer model code: B112. Charging dock model: CDZB112. Use each identifier under the label the manufacturer gives it. A sales SKU, technical model code and storefront record key do not necessarily identify the same level of configuration. Match the documented record to the unit or package you are checking, then verify accessories and regional support separately; a similar name or matching brand alone is not proof of interchangeability.
Xiaomi Robot Vacuum E10 has the following documented robot dimensions: Diameter 325 mm × height 80 mm. Use the stated dimensions for the exact robot or station configuration. Preserve distinctions such as a raised sensor, retracted sensor or installed base when they are documented. A body outline does not include a guarantee that the robot can enter every opening or that the station fits with maintenance access; compare the relevant physical clearance separately.
Zigzag cleaning and scheduled app control
Xiaomi describes zigzag path planning and scheduled cleaning through Mi Home/Xiaomi Home. Those are the supported navigation and control claims here; this record does not establish laser mapping or a particular country’s app-server compatibility.
The advertised 4,000 Pa is an air-duct suction measurement at the top setting in the manufacturer-cited Shanchuan Laboratory test. It is not a floor-cleaning result from this website, and it does not show how the robot will perform on your particular carpet.
Xiaomi Robot Vacuum E10 has the following documented official feature highlights: 4,000 Pa air-duct suction in the top setting, measured in the manufacturer-cited Shanchuan Laboratory test. Zigzag path planning and Mi Home/Xiaomi Home app control with scheduled cleaning. Treat the documented feature description as the manufacturer’s account of this configuration, keeping every stated mode, component and qualification together. It is useful for identifying what to check next; it is not an independent review score or a guarantee that a different bundle provides the same functions. Choose the feature relevant to your actual task and check its conditions before comparing a headline with another model.
For Xiaomi Robot Vacuum E10, use the suction entry with the manufacturer’s measurement conditions and cleaning configuration. A pressure maximum is not an independent measurement of debris pickup in your rooms. For a practical comparison, keep the documented brush, carpet and mopping behavior in view as well; the headline alone cannot rank two products or guarantee an outcome on every surface.
Match CDZB112 before replacing charging hardware
The listed charging dock is CDZB112, measuring 146 × 122 × 87.5 mm. Its rated input and output are both 20 V DC, 0.6 A. These are dock-side ratings, not a statement about the wall adapter’s AC input.
If a replacement listing omits the exact dock model or adapter input label, stop the compatibility decision and ask Xiaomi support to identify the correct replacement. A shared voltage alone does not confirm another dock or adapter will work.
For Xiaomi Robot Vacuum E10, Robot rated power: 35 W. Robot rated voltage: 14.4 V DC. Robot charging voltage: 20 V DC. Charging dock rated input: 20 V DC, 0.6 A. Charging dock rated output: 20 V DC, 0.6 A. Match each electrical rating to the robot, dock or station component named in the source. Their input and output ratings are not interchangeable, and a cleaning or heating power figure is not the same as robot battery capacity. Keep the documented regional supply and exact accessory requirements when arranging charging; do not substitute an unlisted adapter or modify the electrical assembly.
Xiaomi Robot Vacuum E10 has the following documented charging dock dimensions: 146 × 122 × 87.5 mm. Identify what the dock automates and what the cited temperature, capacity or interval actually measures. Washing water, drying air, an internal heater and temperature at the mop or floor are different locations. Likewise, a dust-collection estimate is not a maintenance-free period for the whole system. Keep the measurement point and use conditions attached to the feature when comparing station packages.
Battery and power planning
For Xiaomi Robot Vacuum E10, Rated battery capacity: 2,500 mAh rated. Nominal battery capacity: 2,600 mAh nominal. Distinguish battery capacity from the runtime, charging or resume behavior specified for this model. A nominal capacity is not a guarantee of the same coverage in every cleaning mode. Keep the stated test and operating conditions when comparing products, and use the exact robot and dock instructions before arranging a charging routine or replacement.
Exact product identity
Product identifiers in official records
GTINs, UPCs, manufacturer SKUs and model codes can identify different colors, configurations or bundles. Only identifiers stated in official records are shown; an unpublished ASIN is not inferred.
| Identifier | Exact value | Variant or bundle | Market | Source and review |
|---|---|---|---|---|
| Manufacturer model code | B112 | Model level | Global | Xiaomi · mi.comManufacturer Global specifications, main-unit Product model/Model number; span[data-key="spec_6"] · |
FAQ
Xiaomi Robot Vacuum E10 frequently asked questions
Each answer stays within the facts and sources shown on this page.
01Why are both 2,500 mAh and 2,600 mAh listed for E10?
They are different labels in the same specification: 2,500 mAh rated capacity and 2,600 mAh nominal capacity. Neither figure, by itself, establishes a cleaning runtime for your home.
02Is E10’s 35 W rating its suction strength?
No. 35 W is the robot’s rated electrical power. The separately reported 4,000 Pa is air-duct suction measured at the top setting in Shanchuan Laboratory testing cited by Xiaomi; the two numbers describe different quantities.
03Why does E10 list 14.4 V DC but charge at 20 V DC?
Xiaomi labels 14.4 V DC as the robot’s rated voltage and 20 V DC as its charging voltage. They refer to different specifications; do not substitute one for the other when checking a charging accessory.
04Does the E10 app feature prove it works with my account region?
No. The Global product page documents Mi Home/Xiaomi Home control and scheduled cleaning, but the reviewed information does not settle every account region. Confirm the exact B112 unit and intended region with local Xiaomi support before relying on that feature.