Xiaomi Robot Vacuum 5: low spaces and hot-wash limits

Measure the ramp as part of the dock

The robot is OV31GL, with a listed body size of Φ350 × 88 mm and rated power of 55 W. Its OV31-JZEU dock measures 470 × 360 × 572 mm with the ramp extension, or 260 × 360 × 572 mm without it.

Keep the whole installed dock and the robot’s access route in your space plan. The body measurement does not replace the separately conditioned low-space test.

Xiaomi Robot Vacuum 5 has the following documented official feature highlights: Xiaomi Internal Labs measured up to 20000 Pa fan suction with the robot fully charged; performance depends on the test environment. The retractable radar allows cleaning in low areas higher than 9.5 cm under lab conditions. Those areas are skipped during mapping and cleaned after standard areas; actual access varies. The 80 °C washing claim refers to mop-washing outlet water: in a 25 °C / 60% RH lab test the final wash exceeded 80 °C, not a constant temperature throughout cleaning. Mop pads lift up to 15 mm; Xiaomi recommends Carpet avoidance for long carpets or more reliable protection against wetting. The dock's self-cleaning reduces dirt buildup and odours but does not eliminate them; Xiaomi recommends regular manual cleaning. Treat the documented feature description as the manufacturer’s account of this configuration, keeping every stated mode, component and qualification together. It is useful for identifying what to check next; it is not an independent review score or a guarantee that a different bundle provides the same functions. Choose the feature relevant to your actual task and check its conditions before comparing a headline with another model.

For Xiaomi Robot Vacuum 5, use the suction entry with the manufacturer’s measurement conditions and cleaning configuration. A pressure maximum is not an independent measurement of debris pickup in your rooms. For a practical comparison, keep the documented brush, carpet and mopping behavior in view as well; the headline alone cannot rank two products or guarantee an outcome on every surface.

For Xiaomi Robot Vacuum 5, keep the mopping mechanism, its settings and any lift condition together when deciding how it fits your floors. Mop speed or a lift measurement describes a specified function, not a universal cleaning or carpet-protection result. Check the documented mode and surface boundary before building a routine around the feature; do not assume that a neighboring product’s settings apply to this model.

For Xiaomi Robot Vacuum 5, read mapping and obstacle recognition as distinct functions within the documented navigation system. A map describes the cleaning layout; an avoidance feature describes how the device responds to obstacles under its stated conditions. A mapping claim alone does not establish obstacle recognition, and neither claim guarantees coverage or recognition of every object. Use the model’s actual control and boundary instructions when preparing a room.

For Xiaomi Robot Vacuum 5, identify what the dock automates and what the cited temperature, capacity or interval actually measures. Washing water, drying air, an internal heater and temperature at the mop or floor are different locations. Likewise, a dust-collection estimate is not a maintenance-free period for the whole system. Keep the measurement point and use conditions attached to the feature when comparing station packages.

For Xiaomi Robot Vacuum 5, compare the documented crossing or low-space conditions with the actual shape of the route, retaining distinctions such as a single step, layered threshold or raised and retracted sensor. A maximum is not permission to remove those conditions. Measure the relevant opening or obstacle before treating the feature as a fit decision; this guide does not claim an independent pass-through test in your home.

For Xiaomi Robot Vacuum 5, use the stated dimensions for the exact robot or station configuration. Preserve distinctions such as a raised sensor, retracted sensor or installed base when they are documented. A body outline does not include a guarantee that the robot can enter every opening or that the station fits with maintenance access; compare the relevant physical clearance separately.

Xiaomi Global · www.mi.comXiaomi Global · www.mi.com

The hot-wash figure applies to outlet water

The 80 °C claim comes from the last mop wash exceeding 80 °C at the outlet during a 25 °C, 60% RH lab test. It does not mean the entire washing process remains at that temperature, or that the floor is washed at it.

Xiaomi Global · www.mi.com