Verifiable specifications
Product information supported by official records
| Build volume | 300 × 300 × 300 mm | View source |
|---|---|---|
| Printer dimensions | 445 × 477 × 573 mm | View source |
| Heated-bed limit | 110 °C | View source |
| Nozzle temperature limit | 300 °C | View source |
| Internal storage | 32GB EMMC | View source |
| Combo contents | K2 Pro plus one CFS | View source |
Confirm the delivered equipment before placement
Use the named Combo contents as the order check, then consult the installation instructions for arranging the printer and CFS. The 300 mm cube describes the printable envelope rather than the desk area. A location that fits the printer body alone has not yet been checked for the complete chosen arrangement.
Creality K2 Pro has the following documented build volume: 300 × 300 × 300 mm. The same configuration lists printer dimensions as 445 × 477 × 573 mm. A usable build volume sets the boundary for the object you plan to print. Compare the part in its intended orientation with this envelope before choosing the machine. This measurement is different from the printer’s outside dimensions: fitting the printer on a desk does not establish that a particular part fits inside it.
Creality K2 Pro has the following documented printer dimensions: 445 × 477 × 573 mm. The same configuration lists build volume as 300 × 300 × 300 mm. Use the documented dimensions to plan the physical installation, retaining the exact configuration and measurement conditions. Allowing for the stated machine outline is a starting point; confirm access for the documented loading, removal and maintenance tasks before committing to a tightly fitted location.
Creality K2 Pro has the following documented combo contents: K2 Pro plus one CFS. Keep the package contents and optional additions separate when comparing this version with neighboring offers. The documented bundle establishes only the named configuration, not every seller’s current contents or an accessory’s compatibility across generations. Identify which component supplies the function you need before ordering; this guide does not verify current stock, price or an unnamed replacement package.
Do not turn capacity into an unsupported recommendation
Creality lists a 300 °C nozzle limit, a 110 °C heatbed limit and 32GB EMMC storage. Keep nozzle and bed settings tied to the actual material profile. These figures explain the documented hardware, not a measured speed advantage, a guaranteed material result or support for every CFS-fed material.
Creality K2 Pro has the following documented heated-bed limit: 110 °C. The same configuration lists nozzle temperature limit as 300 °C. Treat the bed limit separately from the hotend limit and the installed print surface. Those entries answer different questions, so a higher nozzle maximum does not automatically give the bed or surface the same capability. Use the documented material and surface combination when selecting a print profile rather than treating the maximum as a universal adhesion setting.
Creality K2 Pro has the following documented nozzle temperature limit: 300 °C. A hotend temperature ceiling is an operating limit, not a complete material-compatibility list or the setting for every print. Read it alongside this model’s documented filament guidance, nozzle configuration and print profiles. The maximum alone does not establish that an enclosure-dependent, abrasive or otherwise restricted material has been approved for this configuration.
Creality K2 Pro has the following documented internal storage: 32GB EMMC. The same configuration lists build volume as 300 × 300 × 300 mm. Use the named software and transfer route for the actual configuration documented here. Sending a file, preparing a sliced job and controlling the device are different steps; availability of one route does not confirm every other function. Check the manufacturer’s version and interface conditions before moving a workflow from a neighboring model or an older installation.
Exact product identity
Product identifiers in official records
GTINs, UPCs, manufacturer SKUs and model codes can identify different colors, configurations or bundles. Only identifiers stated in official records are shown; an unpublished ASIN is not inferred.
| Identifier | Exact value | Variant or bundle | Market | Source and review |
|---|---|---|---|---|
| Manufacturer product name | K2 Pro | Model level | United States | Creality · creality.comCreality K2 Pro — Model identity · |