First-generation Centauri Carbon: verified U.S. facts

Hardware and material boundaries

The captured U.S. specifications confirm the build and temperature limits above and name a 0.4 mm brass-hardened steel nozzle. The documented material list contains carbon/glass-fiber reinforced filament, PLA, PETG, ABS, ASA, TPU, PET, PC and PA. Keep the nozzle relation on the first-generation model and do not infer Centauri Carbon 2 interchangeability.

ELEGOO Centauri Carbon has the following documented build volume: 256 × 256 × 256 mm. A usable build volume sets the boundary for the object you plan to print. Compare the part in its intended orientation with this envelope before choosing the machine. This measurement is different from the printer’s outside dimensions: fitting the printer on a desk does not establish that a particular part fits inside it.

ELEGOO Centauri Carbon has the following documented maximum nozzle temperature: 320 °C. The same configuration lists documented filament families as carbon/glass-fiber reinforced · PLA · PETG · ABS · ASA · TPU · PET · PC · PA. A hotend temperature ceiling is an operating limit, not a complete material-compatibility list or the setting for every print. Read it alongside this model’s documented filament guidance, nozzle configuration and print profiles. The maximum alone does not establish that an enclosure-dependent, abrasive or otherwise restricted material has been approved for this configuration.

ELEGOO Centauri Carbon has the following documented maximum bed temperature: 110 °C. The same configuration lists maximum nozzle temperature as 320 °C. Treat the bed limit separately from the hotend limit and the installed print surface. Those entries answer different questions, so a higher nozzle maximum does not automatically give the bed or surface the same capability. Use the documented material and surface combination when selecting a print profile rather than treating the maximum as a universal adhesion setting.

ELEGOO Centauri Carbon has the following documented nozzle material: Brass-hardened steel, 0.4 mm. The same configuration lists documented filament families as carbon/glass-fiber reinforced · PLA · PETG · ABS · ASA · TPU · PET · PC · PA. Identify the installed nozzle and the exact documented replacement route before changing a print profile or ordering a spare. Diameter, material and printer-family fit are separate parts of that check. A listed option is not necessarily included in the box, and an accessory for another toolhead cannot be declared interchangeable from its appearance or nominal diameter alone.

ELEGOO Centauri Carbon has the following documented documented filament families: carbon/glass-fiber reinforced · PLA · PETG · ABS · ASA · TPU · PET · PC · PA. The same configuration lists nozzle material as Brass-hardened steel, 0.4 mm. The documented material wording is the useful boundary for selecting filament. Preserve distinctions such as ideal, capable, not recommended and supported only under stated conditions. Do not turn a broad temperature specification into permission to use an unlisted material, and do not assume that support at the printer means support through every optional material feeder.

• Build volume: 256 × 256 × 256 mm
• Maximum nozzle / bed temperature: 320 °C / 110 °C
• Documented nozzle: 0.4 mm brass-hardened steel

ELEGOO · us.elegoo.com

Software and included-item boundary

ELEGOO Slicer is the manufacturer-recommended route in the captured U.S. specifications; the same facts also list Orca, Cura, USB and Wi-Fi. ELEGOO states that the filament waste bin is not included and must be printed by the owner from the supplied model rather than assumed from product imagery.

ELEGOO Centauri Carbon has the following documented software and connection routes: ELEGOO Slicer · Orca · Cura · USB · Wi-Fi. The same configuration lists build volume as 256 × 256 × 256 mm. Use the named software and transfer route for the actual configuration documented here. Sending a file, preparing a sliced job and controlling the device are different steps; availability of one route does not confirm every other function. Check the manufacturer’s version and interface conditions before moving a workflow from a neighboring model or an older installation.

ELEGOO · us.elegoo.com