Verifiable specifications
Product information supported by official records
| Build volume | 302 × 162 × 300 mm | View source |
|---|---|---|
| Published XY pixel size | 20 × 26 μm | View source |
| Published resin-heating target | 30 °C | View source |
| Network printing | Wi-Fi cluster printing | View source |
| Named ecosystem software | ELEGOO SatelLite | View source |
Check the layout before inferring production capacity
Use the exact Jupiter 2 machine configuration to inspect the intended parts and supports inside the wide printing rectangle. The listed area does not establish how many copies of an arbitrary part will fit or how quickly a batch will finish. Keep the two XY pixel dimensions distinct from any claimed finished-part tolerance.
ELEGOO Jupiter 2 has the following documented build volume: 302 × 162 × 300 mm. A usable build volume sets the boundary for the object you plan to print. Compare the part in its intended orientation with this envelope before choosing the machine. This measurement is different from the printer’s outside dimensions: fitting the printer on a desk does not establish that a particular part fits inside it.
ELEGOO Jupiter 2 has the following documented published xy pixel size: 20 × 26 μm. The exposure display specification describes the imaging system; it should not be presented as an independent test of finished-part accuracy. Keep display resolution, pixel dimensions and layer settings distinct when comparing machines. A useful purchase check is whether the documented resin and slicing workflow matches the parts you intend to make, rather than ranking printers from the screen headline alone.
Verify the named software workflow rather than inheriting a default
SatelLite and Wi-Fi cluster printing are explicitly named in the product material. That does not independently confirm every third-party slicer or a complete network-management feature set. Select the documented Jupiter 2 workflow, and treat the 30 °C heating figure as the manufacturer’s target rather than a universal resin exposure setting.
ELEGOO Jupiter 2 has the following documented published resin-heating target: 30 °C. Retain the named resin-heating target and the conditions attached to it. A heating setting is not proof that every resin, room condition or point in the tank reaches the same temperature. Use the exact material and operating guidance when preparing a job; this profile does not turn the heater entry into a universal curing or print-quality guarantee.
ELEGOO Jupiter 2 has the following documented network printing: Wi-Fi cluster printing. The same configuration lists build volume as 302 × 162 × 300 mm. Use the named software and transfer route for the actual configuration documented here. Sending a file, preparing a sliced job and controlling the device are different steps; availability of one route does not confirm every other function. Check the manufacturer’s version and interface conditions before moving a workflow from a neighboring model or an older installation.
Exact product identity
Product identifiers in official records
GTINs, UPCs, manufacturer SKUs and model codes can identify different colors, configurations or bundles. Only identifiers stated in official records are shown; an unpublished ASIN is not inferred.
| Identifier | Exact value | Variant or bundle | Market | Source and review |
|---|---|---|---|---|
| Manufacturer product name | Jupiter 2 | Model level | United States | ELEGOO · us.elegoo.comELEGOO Jupiter 2 — Model identity · |