Compatibility decision rules
Match each verdict to the evidence available
Compatibility depends on the exact model, part identity, market and official compatibility wording—not appearance.
Exact model explicitly listed
The official part record names the full model.
Series-level support only
The family is supported, but the exact model is not named.
Missing listing or market mismatch
No direct evidence means compatibility is not inferred.
Officially excluded
Used only when an official record explicitly says it is unsupported.
Choose the documented color capacity
The confirmed relation is between Kobra S1 and first-generation ACE Pro. One unit supplies four-color printing, while two units raise the documented maximum to eight colors. Do not transfer a newer ACE 2 Pro capacity to this relation.
- 1 ACE Pro: 4 colors
- 2 ACE Pro units: up to 8 colors
Keep TPU 95A on direct feed
Anycubic explicitly excludes TPU 95A from ACE Pro multicolor feeding. That does not say the printer cannot use TPU; it means this grade is documented only as a single-color direct-feed task within the current U.S. evidence.
FAQ
Anycubic Kobra S1 frequently asked questions
Each answer stays within the facts and sources shown on this page.
01How many colors can Kobra S1 print with ACE Pro, and can it feed TPU?
One ACE Pro provides four colors and two units provide up to eight. Anycubic explicitly excludes TPU 95A from ACE Pro multicolor feeding, so TPU should remain a single-color direct-feed task.
Traceable by design
Evidence used for this page
01Anycubic Kobra S1Anycubic · store.anycubic.com
Publisher: Anycubic
Source domain: store.anycubic.com
Original record: Anycubic Kobra S1
Evidence locator:
- FAQs > How many colors; annotations [1] and Kobra S1 Series Tech Specs
Scope: United States · Product page
Source published: Unknown
Source updated: Unknown
Last checked by My Device Guide:
Anycubic · store.anycubic.com ↗02Anycubic ACE ProAnycubic · store.anycubic.com
Publisher: Anycubic
Source domain: store.anycubic.com
Original record: Anycubic ACE Pro
Evidence locator:
- Specifications > Printer Compatibility and Supporting Filaments
Scope: United States · Accessory page
Source published: Unknown
Source updated: Unknown
Last checked by My Device Guide:
Anycubic · store.anycubic.com ↗Last reviewed
Sources, model identity and market scope were reviewed.