Verifiable specifications
Product information supported by official records
| Build volume | 220 × 220 × 240mm | View source |
|---|---|---|
| Printer dimensions | 433 × 366 × 490mm | View source |
| Nozzle temperature limit | 300 °C | View source |
| File transfer | USB Drive/WLAN | View source |
| Firmware family | Creality OS (Klipper) | View source |
A firmware family is not a universal modification guide
The Klipper-based listing identifies the documented platform; it does not approve every third-party firmware image or configuration change. Use the KE’s official instructions for the intended transfer method. Resolve a connection issue against that workflow before deciding that instructions for a different V3 model are interchangeable.
Creality Ender-3 V3 KE has the following documented file transfer: USB Drive/WLAN. The same configuration lists build volume as 220 × 220 × 240mm. Use the named software and transfer route for the actual configuration documented here. Sending a file, preparing a sliced job and controlling the device are different steps; availability of one route does not confirm every other function. Check the manufacturer’s version and interface conditions before moving a workflow from a neighboring model or an older installation.
Check height and body dimensions separately
The 240 mm print height belongs to the KE’s 220 × 220 × 240 mm envelope. The body is listed as 433 × 366 × 490 mm, and the nozzle limit is 300 °C. None of these numbers establishes the compatibility of an SE replacement part or a material profile copied from another printer.
Creality Ender-3 V3 KE has the following documented build volume: 220 × 220 × 240mm. The same configuration lists printer dimensions as 433 × 366 × 490mm. A usable build volume sets the boundary for the object you plan to print. Compare the part in its intended orientation with this envelope before choosing the machine. This measurement is different from the printer’s outside dimensions: fitting the printer on a desk does not establish that a particular part fits inside it.
Creality Ender-3 V3 KE has the following documented printer dimensions: 433 × 366 × 490mm. The same configuration lists build volume as 220 × 220 × 240mm. Use the documented dimensions to plan the physical installation, retaining the exact configuration and measurement conditions. Allowing for the stated machine outline is a starting point; confirm access for the documented loading, removal and maintenance tasks before committing to a tightly fitted location.
Creality Ender-3 V3 KE has the following documented nozzle temperature limit: 300 °C. A hotend temperature ceiling is an operating limit, not a complete material-compatibility list or the setting for every print. Read it alongside this model’s documented filament guidance, nozzle configuration and print profiles. The maximum alone does not establish that an enclosure-dependent, abrasive or otherwise restricted material has been approved for this configuration.
Exact product identity
Product identifiers in official records
GTINs, UPCs, manufacturer SKUs and model codes can identify different colors, configurations or bundles. Only identifiers stated in official records are shown; an unpublished ASIN is not inferred.
| Identifier | Exact value | Variant or bundle | Market | Source and review |
|---|---|---|---|---|
| Manufacturer product name | Ender-3 V3 KE | Model level | United States | Creality · creality.comCreality Ender-3 V3 KE — Model identity · |