Verifiable specifications
Product information supported by official records
| Build volume | 220 × 220 × 250 mm | View source |
|---|---|---|
| Printer dimensions | 355 × 355 × 482 mm | View source |
| Net weight | 12.4 kg | View source |
| Nozzle temperature limit | 300 °C | View source |
| Heated-bed limit | 100 °C | View source |
| Print interfaces | USB flash disk, LAN printing and Creality Cloud | View source |
Use the handbook as the configuration anchor
For a delivery or used-unit check, compare the full model name with the manual and order record. The print dimensions and outer body answer different questions, so retain both when assessing a location. Neither set of dimensions proves that an accessory from another edition fits.
Creality K1C 2025 has the following documented build volume: 220 × 220 × 250 mm. The same configuration lists printer dimensions as 355 × 355 × 482 mm. A usable build volume sets the boundary for the object you plan to print. Compare the part in its intended orientation with this envelope before choosing the machine. This measurement is different from the printer’s outside dimensions: fitting the printer on a desk does not establish that a particular part fits inside it.
Creality K1C 2025 has the following documented printer dimensions: 355 × 355 × 482 mm. The same configuration lists build volume as 220 × 220 × 250 mm. Use the documented dimensions to plan the physical installation, retaining the exact configuration and measurement conditions. Allowing for the stated machine outline is a starting point; confirm access for the documented loading, removal and maintenance tasks before committing to a tightly fitted location.
Creality K1C 2025 has the following documented net weight: 12.4 kg. Keep this weight tied to the configuration and measurement scope given by the manufacturer. A figure excluding packaging or accessories should not be read as the weight of a delivered bundle. When planning placement or transport, identify which components are actually included rather than borrowing a value from a similarly named version.
Print interfaces do not establish feeder compatibility
The handbook lists USB flash disk, LAN printing and Creality Cloud printing, with a 300 °C nozzle limit and 100 °C heated-bed limit. These describe file submission and thermal ratings. They do not establish support for an add-on material system, nor convert an announced accessory plan into a currently supported connection.
Creality K1C 2025 has the following documented nozzle temperature limit: 300 °C. A hotend temperature ceiling is an operating limit, not a complete material-compatibility list or the setting for every print. Read it alongside this model’s documented filament guidance, nozzle configuration and print profiles. The maximum alone does not establish that an enclosure-dependent, abrasive or otherwise restricted material has been approved for this configuration.
Creality K1C 2025 has the following documented heated-bed limit: 100 °C. The same configuration lists nozzle temperature limit as 300 °C. Treat the bed limit separately from the hotend limit and the installed print surface. Those entries answer different questions, so a higher nozzle maximum does not automatically give the bed or surface the same capability. Use the documented material and surface combination when selecting a print profile rather than treating the maximum as a universal adhesion setting.
Creality K1C 2025 has the following documented print interfaces: USB flash disk, LAN printing and Creality Cloud. The same configuration lists build volume as 220 × 220 × 250 mm. Use the named software and transfer route for the actual configuration documented here. Sending a file, preparing a sliced job and controlling the device are different steps; availability of one route does not confirm every other function. Check the manufacturer’s version and interface conditions before moving a workflow from a neighboring model or an older installation.
Exact product identity
Product identifiers in official records
GTINs, UPCs, manufacturer SKUs and model codes can identify different colors, configurations or bundles. Only identifiers stated in official records are shown; an unpublished ASIN is not inferred.
| Identifier | Exact value | Variant or bundle | Market | Source and review |
|---|---|---|---|---|
| Manufacturer product name | K1C 2025 | Model level | United States | Creality · wiki.creality.comPDF page 1 — Creality K1C 2025 · |