Verifiable specifications
Product information supported by official records
| Build volume | 256 × 256 × 256 mm | View source |
|---|---|---|
| Published nozzle limit | 350 °C | View source |
| Motion architecture | CoreXY | View source |
| Manufacturer slicer | ElegooSlicer | View source |
| Published heated-bed limit | 110 °C | View source |
| Enclosure design | Enclosed chamber with controlled grille | View source |
Keep the three thermal questions distinct
An enclosure, a nozzle heater and a heated bed serve different specification fields. Match the nozzle and bed settings to the documented material profile, and use the official enclosure instructions for the chosen setup. Neither the Carbon name nor the grille description establishes a universal material or air-quality guarantee.
ELEGOO Centauri Carbon 2 has the following documented published nozzle limit: 350 °C. A hotend temperature ceiling is an operating limit, not a complete material-compatibility list or the setting for every print. Read it alongside this model’s documented filament guidance, nozzle configuration and print profiles. The maximum alone does not establish that an enclosure-dependent, abrasive or otherwise restricted material has been approved for this configuration.
ELEGOO Centauri Carbon 2 has the following documented published heated-bed limit: 110 °C. The same configuration lists published nozzle limit as 350 °C. Treat the bed limit separately from the hotend limit and the installed print surface. Those entries answer different questions, so a higher nozzle maximum does not automatically give the bed or surface the same capability. Use the documented material and surface combination when selecting a print profile rather than treating the maximum as a universal adhesion setting.
ELEGOO Centauri Carbon 2 has the following documented enclosure design: Enclosed chamber with controlled grille. The same configuration lists published nozzle limit as 350 °C. Keep the chamber claim separate from nozzle and bed temperatures. An enclosure, an actively heated chamber and an “up to” chamber-temperature statement are not interchangeable descriptions. For the configuration documented here, check the material guidance and any stated conditions; the chamber entry alone is not evidence that every job reaches the listed maximum.
Select the Carbon 2 profile, not a family shortcut
The documented platform is CoreXY with a 256 × 256 × 256 mm envelope and ElegooSlicer. Keep Carbon 2 in the model selection even when another Centauri shares some dimensions. Shared motion terminology or software does not make the machines’ replacement nozzles and accessories interchangeable.
For ELEGOO Centauri Carbon 2, Build volume: 256 × 256 × 256 mm. A usable build volume sets the boundary for the object you plan to print. Compare the part in its intended orientation with this envelope before choosing the machine. This measurement is different from the printer’s outside dimensions: fitting the printer on a desk does not establish that a particular part fits inside it.
For ELEGOO Centauri Carbon 2, Motion architecture: CoreXY. The documented mechanism or motion limit describes how this configuration is arranged. It is not automatically the production speed for a finished part. Compare the actual task, material and profile conditions before using a maximum in a buying decision; do not convert a hardware headline into an unsupported claim about quality or time saved.
For ELEGOO Centauri Carbon 2, Manufacturer slicer: ElegooSlicer. Use the named software and transfer route for the actual configuration documented here. Sending a file, preparing a sliced job and controlling the device are different steps; availability of one route does not confirm every other function. Check the manufacturer’s version and interface conditions before moving a workflow from a neighboring model or an older installation.
Exact product identity
Product identifiers in official records
GTINs, UPCs, manufacturer SKUs and model codes can identify different colors, configurations or bundles. Only identifiers stated in official records are shown; an unpublished ASIN is not inferred.
| Identifier | Exact value | Variant or bundle | Market | Source and review |
|---|---|---|---|---|
| Manufacturer product name | Centauri Carbon 2 | Model level | United States | ELEGOO · us.elegoo.comELEGOO Centauri Carbon 2 — Model identity · |