Verifiable specifications
Product information supported by official records
| Build volume | 225 × 225 × 280 mm | View source |
|---|---|---|
| Published nozzle limit | 260 °C | View source |
| Published heated-bed limit | 100 °C | View source |
| File transfer | TF card, USB cable | View source |
| Maximum operating envelope including rack and tray | 475 × 580 × 725 mm (Including Rack & Tray) | View source |
| Net weight | 8.1 kg | View source |
Preserve the activity-space qualification
The net weight is listed as 8.1 kg. Combine that with the operating dimensions when assessing the location, then follow the installation guide for support and access requirements. Do not shrink the desk estimate to the much smaller printable rectangle, or treat a static body outline as equivalent to the published activity space.
ELEGOO Neptune 3 Pro has the following documented build volume: 225 × 225 × 280 mm. The same configuration lists maximum operating envelope including rack and tray as 475 × 580 × 725 mm (Including Rack & Tray). A usable build volume sets the boundary for the object you plan to print. Compare the part in its intended orientation with this envelope before choosing the machine. This measurement is different from the printer’s outside dimensions: fitting the printer on a desk does not establish that a particular part fits inside it.
ELEGOO Neptune 3 Pro has the following documented maximum operating envelope including rack and tray: 475 × 580 × 725 mm (Including Rack & Tray). The same configuration lists build volume as 225 × 225 × 280 mm. Use the documented dimensions to plan the physical installation, retaining the exact configuration and measurement conditions. Allowing for the stated machine outline is a starting point; confirm access for the documented loading, removal and maintenance tasks before committing to a tightly fitted location.
ELEGOO Neptune 3 Pro has the following documented net weight: 8.1 kg. Keep this weight tied to the configuration and measurement scope given by the manufacturer. A figure excluding packaging or accessories should not be read as the weight of a delivered bundle. When planning placement or transport, identify which components are actually included rather than borrowing a value from a similarly named version.
Identify the original transfer workflow
The product table lists TF card and USB cable, with a 260 °C nozzle limit and a 100 °C bed limit. Keep that workflow separate from network-enabled Neptune configurations. Select the Neptune 3 Pro profile and documented material settings rather than assuming a newer model’s temperatures or connection guide applies.
ELEGOO Neptune 3 Pro has the following documented published nozzle limit: 260 °C. A hotend temperature ceiling is an operating limit, not a complete material-compatibility list or the setting for every print. Read it alongside this model’s documented filament guidance, nozzle configuration and print profiles. The maximum alone does not establish that an enclosure-dependent, abrasive or otherwise restricted material has been approved for this configuration.
ELEGOO Neptune 3 Pro has the following documented published heated-bed limit: 100 °C. The same configuration lists published nozzle limit as 260 °C. Treat the bed limit separately from the hotend limit and the installed print surface. Those entries answer different questions, so a higher nozzle maximum does not automatically give the bed or surface the same capability. Use the documented material and surface combination when selecting a print profile rather than treating the maximum as a universal adhesion setting.
ELEGOO Neptune 3 Pro has the following documented file transfer: TF card, USB cable. The same configuration lists build volume as 225 × 225 × 280 mm. Use the named software and transfer route for the actual configuration documented here. Sending a file, preparing a sliced job and controlling the device are different steps; availability of one route does not confirm every other function. Check the manufacturer’s version and interface conditions before moving a workflow from a neighboring model or an older installation.
Exact product identity
Product identifiers in official records
GTINs, UPCs, manufacturer SKUs and model codes can identify different colors, configurations or bundles. Only identifiers stated in official records are shown; an unpublished ASIN is not inferred.
| Identifier | Exact value | Variant or bundle | Market | Source and review |
|---|---|---|---|---|
| Manufacturer product name | Neptune 3 Pro | Model level | United States | ELEGOO · us.elegoo.comELEGOO Neptune 3 Pro — Model identity · |