Verifiable specifications
Product information supported by official records
| Build volume | 225 × 225 × 265 mm | View source |
|---|---|---|
| Published nozzle limit | 300 °C | View source |
| Published heated-bed limit | 110 °C | View source |
| File transfer | LAN, USB | View source |
| Maximum operating envelope including rack and tray | 475 × 550 × 735 mm (Including Rack & Tray) | View source |
| Net weight | 8.3 kg | View source |
Use the operating dimensions for the location
The printer’s listed build volume is 225 × 225 × 265 mm and net weight is 8.3 kg. The build envelope checks the part; the larger activity envelope checks the location. Follow the official installation instructions for the complete arrangement, especially where other equipment shares the desk.
ELEGOO Neptune 4 has the following documented build volume: 225 × 225 × 265 mm. The same configuration lists maximum operating envelope including rack and tray as 475 × 550 × 735 mm (Including Rack & Tray). A usable build volume sets the boundary for the object you plan to print. Compare the part in its intended orientation with this envelope before choosing the machine. This measurement is different from the printer’s outside dimensions: fitting the printer on a desk does not establish that a particular part fits inside it.
ELEGOO Neptune 4 has the following documented maximum operating envelope including rack and tray: 475 × 550 × 735 mm (Including Rack & Tray). The same configuration lists build volume as 225 × 225 × 265 mm. Use the documented dimensions to plan the physical installation, retaining the exact configuration and measurement conditions. Allowing for the stated machine outline is a starting point; confirm access for the documented loading, removal and maintenance tasks before committing to a tightly fitted location.
ELEGOO Neptune 4 has the following documented net weight: 8.3 kg. Keep this weight tied to the configuration and measurement scope given by the manufacturer. A figure excluding packaging or accessories should not be read as the weight of a delivered bundle. When planning placement or transport, identify which components are actually included rather than borrowing a value from a similarly named version.
A LAN entry is not a claim of built-in Wi-Fi
Use the documented LAN/USB route for the original configuration rather than inventing a wireless feature from another Neptune listing. The thermal table gives 300 °C for the nozzle and 110 °C for the bed. Those limits remain separate from the material profile and do not establish a recommended setting for every job.
ELEGOO Neptune 4 has the following documented published nozzle limit: 300 °C. A hotend temperature ceiling is an operating limit, not a complete material-compatibility list or the setting for every print. Read it alongside this model’s documented filament guidance, nozzle configuration and print profiles. The maximum alone does not establish that an enclosure-dependent, abrasive or otherwise restricted material has been approved for this configuration.
ELEGOO Neptune 4 has the following documented published heated-bed limit: 110 °C. The same configuration lists published nozzle limit as 300 °C. Treat the bed limit separately from the hotend limit and the installed print surface. Those entries answer different questions, so a higher nozzle maximum does not automatically give the bed or surface the same capability. Use the documented material and surface combination when selecting a print profile rather than treating the maximum as a universal adhesion setting.
ELEGOO Neptune 4 has the following documented file transfer: LAN, USB. The same configuration lists build volume as 225 × 225 × 265 mm. Use the named software and transfer route for the actual configuration documented here. Sending a file, preparing a sliced job and controlling the device are different steps; availability of one route does not confirm every other function. Check the manufacturer’s version and interface conditions before moving a workflow from a neighboring model or an older installation.
Exact product identity
Product identifiers in official records
GTINs, UPCs, manufacturer SKUs and model codes can identify different colors, configurations or bundles. Only identifiers stated in official records are shown; an unpublished ASIN is not inferred.
| Identifier | Exact value | Variant or bundle | Market | Source and review |
|---|---|---|---|---|
| Manufacturer product name | Neptune 4 | Model level | United States | ELEGOO · us.elegoo.comELEGOO Neptune 4 — Model identity · |