Prusa CORE One+ Gen2: standard nozzle and optional camera

Read the standard configuration first

The brass CHT nozzle and optional camera describe different aspects of the purchase: one is the documented standard nozzle, the other requires a package check. Do not use a picture of an equipped printer to decide what your unit includes. Confirm the exact Gen2 configuration before borrowing dimensions or nozzle assumptions from another CORE One variant.

Prusa CORE One+ (Gen 2) has the following documented build volume: 250 × 220 × 270 mm. A usable build volume sets the boundary for the object you plan to print. Compare the part in its intended orientation with this envelope before choosing the machine. This measurement is different from the printer’s outside dimensions: fitting the printer on a desk does not establish that a particular part fits inside it.

Prusa CORE One+ (Gen 2) has the following documented standard nozzle: 0.4 mm brass CHT. Identify the installed nozzle and the exact documented replacement route before changing a print profile or ordering a spare. Diameter, material and printer-family fit are separate parts of that check. A listed option is not necessarily included in the box, and an accessory for another toolhead cannot be declared interchangeable from its appearance or nominal diameter alone.

Prusa CORE One+ (Gen 2) has the following documented camera package status: Optional chamber camera. Keep the package contents and optional additions separate when comparing this version with neighboring offers. The documented bundle establishes only the named configuration, not every seller’s current contents or an accessory’s compatibility across generations. Identify which component supplies the function you need before ordering; this guide does not verify current stock, price or an unnamed replacement package.

Prusa Research · www.prusa3d.com

Two temperature limits, not one material guarantee

The listed nozzle limit is 290 °C and the heated-bed limit is 120 °C. Compare the material profile with both values and the actual nozzle configuration; the bed rating should not be mistaken for the chamber temperature. This specification does not independently verify the print quality of any material.

Prusa CORE One+ (Gen 2) has the following documented standard nozzle limit: 290 °C. A hotend temperature ceiling is an operating limit, not a complete material-compatibility list or the setting for every print. Read it alongside this model’s documented filament guidance, nozzle configuration and print profiles. The maximum alone does not establish that an enclosure-dependent, abrasive or otherwise restricted material has been approved for this configuration.

Prusa CORE One+ (Gen 2) has the following documented heated-bed limit: 120 °C. The same configuration lists standard nozzle limit as 290 °C. Treat the bed limit separately from the hotend limit and the installed print surface. Those entries answer different questions, so a higher nozzle maximum does not automatically give the bed or surface the same capability. Use the documented material and surface combination when selecting a print profile rather than treating the maximum as a universal adhesion setting.

Prusa Research · www.prusa3d.com