Prusa MK3S+: why Temperature Calibration can be disabled

Confirm the condition before troubleshooting

Read the menu behavior together with the installed probe and the applicable firmware documentation. Do not try to restore the option solely because an older MK3S guide shows it. If the physical probe and reported configuration disagree, stop changing settings and ask official support to identify the mismatch.

Original Prusa MK3S+ has the following documented temperature-calibration menu with superpinda: Temperature Calibration is disabled when firmware detects SuperPINDA. Keep the calibration capability tied to the documented sensor, hardware and procedure. A named automatic function does not eliminate the need to use the correct setup instructions or establish that every first layer will succeed. When troubleshooting, use this model’s documented checks and stop conditions rather than transferring a menu option or repair sequence from another revision.

Prusa Research · cdn.prusa3d.com

The remaining setup is still model-specific

The shared handbook specifies 1.75 mm filament, a spring-steel-sheet heatbed and Einsy Rambo hardware, and introduces the first print through an SD card. Use the MK3S+ machine configuration and the appropriate sheet instructions. A documented missing menu does not remove those ordinary setup checks or prove the quality of a first layer.

Original Prusa MK3S+ has the following documented filament diameter: 1.75 mm. Match the documented filament diameter when preparing a job; nozzle diameter describes a different component. Keep the spool’s material designation and the selected feed route in view as well. Meeting the diameter entry alone does not resolve restrictions on a material feeder, abrasive material or a configuration that the manufacturer has not named.

Original Prusa MK3S+ has the following documented print-sheet arrangement: Heatbed with spring steel sheet. Identify the documented print surface and its model-specific mounting or arrangement before choosing a replacement sheet. The surface, heated bed and material profile are separate elements of the setup. A matching size or a familiar surface name does not establish cross-model fit; retain the exact manufacturer instructions when preparing the plate and selecting the supported material workflow.

Original Prusa MK3S+ has the following documented mainboard: Einsy Rambo. Treat the documented feature description as the manufacturer’s account of this configuration, keeping every stated mode, component and qualification together. It is useful for identifying what to check next; it is not an independent review score or a guarantee that a different bundle provides the same functions. Choose the feature relevant to your actual task and check its conditions before comparing a headline with another model.

Original Prusa MK3S+ has the following documented handbook first-print medium: SD card. Use the named software and transfer route for the actual configuration documented here. Sending a file, preparing a sliced job and controlling the device are different steps; availability of one route does not confirm every other function. Check the manufacturer’s version and interface conditions before moving a workflow from a neighboring model or an older installation.

Prusa Research · cdn.prusa3d.com