Robot vacuums · Device guides
This section is limited to published Robot vacuums models and tasks. Find model profiles, comparisons, compatibility checks, maintenance instructions, troubleshooting and app guidance.
Dreame
For the US Dreame Aqua10 Roller, the 2.36 in climbing claim applies to a double-layer step, not every doorway. The listed single-layer limit is 1.65 in. Fresh-water roller mopping and heated dock washing are separate functions; actual performance on your threshold and floor remains unverified. Measure the step shape before relying on the headline height.
Dreame
The US Aqua10 Ultra Roller lists an AutoSeal carpet cover with 0.55 in lift, while its 3.15 in ProLeap headline describes a double-layer step under specific conditions. Neither number alone confirms your carpet transition. Check the carpet's care requirements and measure the step's height and landing width before planning unattended access.
Dreame
The US Dreame D20 Plus combines vacuuming and mopping with a manufacturer claim of 150 days of hands-off dust collection. That duration concerns dust handling, not every maintenance task. The verified listing does not establish automatic mop washing or drying. If those are essential, confirm them explicitly before choosing a dock bundle.
Dreame
The US Dreame D20 Pro Plus lists SideReach vacuuming with an extending side brush, 13,000 Pa suction and hands-off dust collection. These address edge reach, suction and dust handling—not verified whole-room cleaning results. Automatic mop washing and drying are not established by the current record. Check those separately if dock care drives your purchase.
Dreame
Dreame lists a 0.41 in mop lift for the US D30 Ultra, alongside automatic cleaning and drying. The dimension is in inches and describes mop lifting; it does not establish suitability for every carpet. Check your carpet's care requirements and the exact model's instructions before relying on automatic transitions.
ECOVACS
The US White N30 PRO OMNI combines 10,000 Pa stated suction with hot-water mop washing and hot-air drying. Its 353 × 353 × 104 mm body and separate station water tanks are useful first checks for placement and refilling. The advertised 320 min runtime is a quiet vacuum-only laboratory result, not a vacuum-and-mop promise. Measure your space and compare the cleaning mode you will actually use.
ECOVACS
For mixed floors, the US DEEBOT T30C offers a stated 9 mm mop lift and OZMO Turbo 2.0 dual spinning mops. Its station washes mops at 75°C and dries them at 45°C. The advertised 180 min runtime is standard vacuum-and-mop operation on hard floors; silent vacuum-only mode is listed at 220 min. Match your floor-care requirements and cleaning mode before comparing the headline figures.
ECOVACS
The US T50 PRO OMNI has an 81 mm body, but its manual warns that a similar-height furniture entrance can trap the robot. It uses OZMO Turbo 2.0 rotating mop plates and TruEdge 2.0 edge cleaning, with station washing at 70°C and drying at 45°C. Measure the actual entrance before buying, and keep routine brush and filter care in the plan despite the ZeroTangle name.
ECOVACS
The US T80 OMNI lets you vacuum carpets before mopping and choose separate carpet strategies. Its OZMO ROLLER is paired with station washing adjustable within 40–75°C and 45°C hot-air drying. Compare the listed 297 min silent vacuum-only runtime with 195 min standard vacuum-and-mop runtime on hard floors—not as equivalent tests. Check your carpet strategy and the 98 mm body height before choosing it.
ECOVACS
On the US T80S OMNI, TruEdge 3.0 extends the roller by a stated 1.5 cm; the side brush is fixed. The roller lifts for carpets, while both brushes lift for liquid spills. Station care uses water up to 75°C and separate 63°C hot-air rolling drying. Check those specific actions against your floors rather than assuming every brush extends or that washing temperature describes the floor.
ECOVACS
The US T90 PRO OMNI uses PowerBoost during routine mop-cleaning intervals: ECOVACS states 10% battery restored in 3 min, not continuous charging while it cleans away from the station. Its 27 cm roller and bagged dock are separate ownership considerations. Before choosing it, compare your thresholds with the stated single-stage and continuous-stage limits; the larger figure does not describe one vertical step.
ECOVACS
The US X11 PRO OMNI pairs a bagged station with OZMO ROLLER 2.0 and PowerBoost charging during mop-cleaning intervals. Its TruePass claims distinguish single thresholds up to 2.4 cm from multi-threshold or sliding-door-track structures up to 4 cm. Match the shape of your doorway, not just the highest number. Long-area coverage is not the same as uninterrupted battery-only runtime.
ECOVACS
The US X12 OmniCyclone combines FocusJet targeted spraying for dried-on stains with a 10.6 in OZMO ROLLER 3.0 and a bagless station. For carpets, the roller lifts 0.59 in and a cover deploys around it. Those mechanisms do not establish results on every stain or rug. Check floor-care requirements and the distinct single-threshold and double-step limits before relying on automatic cleaning.
ECOVACS
This guide covers DEEBOT X12 PRO OMNI White (EU 3P) on ECOVACS’ global portal, not a confirmed US retail variant. FocusJet is described as pre-softening dried-on stains before roller mopping. The PowerBoost “perpetual run” claim requires a model with automatic water refilling and draining. Confirm the exact bundle and water connection before relying on that claim; the global page does not establish local availability or warranty.
ECOVACS
The US DEEBOT X12S overview describes FocusJet pre-spraying dried kitchen stains, continuous fresh-water roller rinsing and a bagless OmniCyclone station. It lists 53 AW BLAST suction, not a Pa pressure rating. PowerBoost recharges during mop washing rather than providing battery-only continuous operation. Use these mechanisms to shortlist it, then confirm the exact retail variant, dimensions and local support before purchase.
ECOVACS
The US X5 PRO OMNI combines a D-shaped body and TruEdge mop extension with 0.6 in mop lifting; its separate threshold claim is up to 0.87 in. The 313 × 346 × 95 mm body is not a guaranteed furniture clearance—the manual warns about similar-height entrances. For ownership, check the station’s selectable drying durations and the cleaning mode behind runtime, not just the maximum suction figure.
ECOVACS
The US X8 PRO OMNI uses an OZMO ROLLER at 200 RPM with 16 clean-water nozzles while dirty water is scraped away. Carpet First vacuums carpets with a dry mop before wet cleaning. Its 150-day tray claim is not a whole-machine maintenance-free period: the US manual still lists weekly roller-mop, brush and filter care. Match the carpet mode and care routine to your home before buying.
ECOVACS
The US X9 PRO OMNI changes which parts touch the floor: it lifts the mop on carpets, both brushes for spills and the side brush for large particles. Station washing adjusts within 40–75°C, separate from 63°C drying. For runtime, compare the listed 252 min silent vacuum-only and 158 min standard vacuum-and-mop modes on hard floors separately. These are manufacturer specifications, not guarantees for every surface.
Dreame
The US L10s Ultra Gen 2 combines MopExtend RoboSwing with automatic dust collection. Its up-to-4 cm claim is mop reach into gaps, not robot clearance. TriCut and the water hookup kit are separate purchases, and hookup availability varies by region. Check those extras before treating the advertised cleaning system as the complete package.
Dreame
The US L40 Ultra Gen 2 PowerDock empties dust, washes and hot-air dries mop pads, and refills the robot’s water box. You still refill the clean-water tank and empty used water; automatic solution adding needs a separately purchased dispenser. Check dock space and the exact color SKU before buying. The mop-lift figure alone does not establish suitability for your carpet.
