Robot vacuums · Device guides
Page 5 of 8, covering published records 81–100. This section is limited to published Robot vacuums models and tasks. Find model profiles, comparisons, compatibility checks, maintenance instructions, troubleshooting and app guidance.
Page 5Shark
The US NeverTouch Pro RV2820ZE vacuums and mops, with a dock that washes and dries the pad after cleaning. Its 60-day debris-bin claim and up-to-30-day water-refill claim describe different tasks. They are not one maintenance-free period, and the reviewed material does not establish a heated-wash temperature or a numeric threshold height.
Shark
The US Shark Stratos RV2720ZE description lists a base that cleans, empties and refills itself, then washes and dries the mop after each mission. That supports a more specific dock-care workflow than the word “automatic” alone. The advertised hands-free period is not a verified schedule for every component; check the exact care instructions and floor requirements before relying on it.
Shark
For the reviewed US white RV2930XE, Shark specifies 185°F mop-pad washing and 175°F drying in the base. These are dock-care temperatures, not the temperature applied to your floor. The robot vacuums and mops, but buying decisions should keep dock heat, dust storage and water refill as separate capabilities.
Shark
The reviewed US Luxe Evergreen RV3026XEUSGN uses UV Stain Detect to reveal stains; the feature is not documented here as UV sterilization. Its HyperSonic Mopping comparison names another Shark model, and its runtime has a floor-and-mode condition. Read those limits before treating UV Reveal as a hygiene or universal performance claim.
Dreame
For the US X60 Max Ultra Complete, a retracted-sensor body height is not the furniture-entry requirement. Dreame specifies at least 3.19 in (8.1 cm), VersaLift enabled and a flat underside without protrusions. Step crossing also depends on whether the obstacle is single- or double-layered. Measure the gap and step geometry before buying; the laboratory figures do not guarantee passage in your home.
Dreame
With VersaLift enabled, the US Dreame X60 Ultra needs at least 3.19 in (8.1 cm) entry clearance beneath a flat, protrusion-free surface; its 3.13 in (7.95 cm) body height is not enough. Dreame also reports mop temperatures of 86°F–104°F (30–40°C) after 1 minute of cleaning following hot-water washing—not constant floor temperature. Measure the route and check step geometry before relying on a clearance or climbing claim.
Xiaomi
On Xiaomi’s Global 5 Pro, AI recognition, video manager and real-scene photos are off by default and must be enabled in Xiaomi Home. Automatic mop rewash also needs manual enabling. The camera hardware alone does not mean these functions are active. Confirm your preferred settings, then check low-furniture access separately rather than relying on the slim body specification.
Xiaomi
Xiaomi E10 is model B112, with a 325 mm diameter and 80 mm body height. Xiaomi’s Global specifications pair it with the CDZB112 charging dock. Compare those dimensions with the space you want cleaned; body height alone does not establish a minimum operating clearance. Local app-region support and warranty are not established here—verify both for the unit you plan to buy.
Xiaomi
Xiaomi’s Global E10C follows a zigzag cleaning path and provides 3 manually selectable water-flow levels. Its 110-minute runtime refers to a fully charged unit in Standard vacuum-and-mop mode, not every setting. Check the E10C name alongside model B112 and measure the robot and charging dock separately; a shared-looking code does not establish accessory interchangeability.
Xiaomi
The Global Xiaomi E5 uses a suction nozzle and dual side brushes with a zigzag cleaning path. Its body is Φ300 × 70 mm and its listed net weight is 2.3 kg. Those measurements help with space planning, but they do not guarantee entry beneath particular furniture. CDZC108 is the charging-dock code, not the robot’s model code; keep that distinction when matching a listing.
Xiaomi
For Xiaomi H40, two checks come before convenience claims: match the OV51 robot and OV51JCZ dock, then verify the dock’s regional input label and the brush fitted for carpet use. Xiaomi’s Global page lists different EU/UK and US electrical standards and says the anti-tangle side brush is not suitable for carpets. Local availability, app support and warranty are not confirmed by those listings.
Xiaomi
The Global H50 Pro’s manufacturer test concerns the extended mop arm reaching under gaps at least 2.8 cm high—not whole-robot clearance. The robot body is 355 × 353.5 × 93 mm. Measure the actual opening separately and keep the drying and carpet figures attached to their own test conditions.
Xiaomi
For Xiaomi’s Global H50, set carpet areas in Xiaomi Home before relying on the documented mop lift. The pads can rise up to 10 mm, but Xiaomi recommends Carpet avoidance for carpets thicker than 8 mm, long pile or tassels. Confirm the carpet type and settings first; the lift figure is not a guarantee that every carpet stays dry.
Xiaomi
Xiaomi’s Global Robot Vacuum 5 has retractable radar, with lab-tested access to areas higher than 9.5 cm—not a universal clearance guarantee. It skips these spaces while mapping and cleans them after standard areas. Check usable clearance and the dock footprint before buying; the body height alone is not the entry requirement, and self-cleaning does not eliminate manual dock care.
Xiaomi
Xiaomi’s Global S10 uses LDS laser navigation with zigzag and Y-shaped routes. Its documented runtime is 130 minutes ±10% in Standard mode, measured from full charge in an open environment until returning to charge. That is not a maximum-power runtime guarantee. Match B106GL with the full S10 name, then check the stated test conditions rather than assuming shared-looking specifications prove another model is equivalent.
Xiaomi
Do not assume every thin carpet will be detected. Xiaomi’s Global S10+ uses dual rotary pads and carpet avoidance in Mopping mode, but the guide describes detection for carpets thicker than 5 mm. Below 5 mm, it recommends removing the mop-pad tray before cleaning or marking a no-go area. Check the carpet and select that precaution before starting.
Xiaomi
Xiaomi’s Global S20 uses LDS mapping, with zigzag routes for vacuuming and Y-shaped routes for mopping. Its listed 400 mL dustbin and 270 mL water tank describe different supplies; the water volume has a stated manufacturing tolerance. Match the D106 robot and its own charging dock before buying, and do not add mop-lift capabilities that this evidence does not establish.
Xiaomi
The Global Xiaomi S20+ can lift its pads up to 7 mm, but Xiaomi recommends Carpet avoidance for carpets thicker than 5 mm, long pile or tassels. Start with that carpet check, not a blanket assumption that mop lifting prevents wetting. Its 170-minute runtime is also conditional: a fully charged robot in Standard vacuum-and-mop mode, with actual results varying.
Xiaomi
Xiaomi S40 is model OV81: a 340 × 340 × 98 mm robot with LDS multi-storey mapping and a 5,200 mAh nominal battery. Xiaomi’s Global specification lists an OV81CDZ dock with 100–240 V AC input. Measure the intended route and check the dock label before purchase; those Global specifications do not establish local warranty or app-region support.
Xiaomi
Xiaomi S40C is model E101, with a 340 × 340 × 97 mm body and an E101CDZ charging dock in Xiaomi’s Global specifications. Its battery is listed as 2,400 mAh rated and 2,600 mAh nominal—not conflicting capacities. Check the robot and dock labels first; local adapter input, app-region support and warranty still need confirmation for your purchase.
