Verifiable specifications
Product information supported by official records
| Build volume | 153.4 × 87 × 165 mm | View source |
|---|---|---|
| Listed release film | FEP | View source |
| Manufacturer slicer | Photon Workshop | View source |
| Printer dimensions | 230 × 235 × 391 mm | View source |
Make separate checks for the model and the machine
The published printer dimensions are 230 × 235 × 391 mm. Use the build area to inspect the intended job in the slicer, and the outer dimensions as the starting point for placement. A compact body does not remove the need to follow the official installation and resin-handling instructions.
Anycubic Photon Mono 4 has the following documented build volume: 153.4 × 87 × 165 mm. The same configuration lists printer dimensions as 230 × 235 × 391 mm. A usable build volume sets the boundary for the object you plan to print. Compare the part in its intended orientation with this envelope before choosing the machine. This measurement is different from the printer’s outside dimensions: fitting the printer on a desk does not establish that a particular part fits inside it.
Anycubic Photon Mono 4 has the following documented printer dimensions: 230 × 235 × 391 mm. The same configuration lists build volume as 153.4 × 87 × 165 mm. Use the documented dimensions to plan the physical installation, retaining the exact configuration and measurement conditions. Allowing for the stated machine outline is a starting point; confirm access for the documented loading, removal and maintenance tasks before committing to a tightly fitted location.
Match the consumable name with the exact part
The FEP designation identifies the listed film material, not a universal replacement size. Check an exact Mono 4 replacement listing rather than ordering solely by the FEP label. In Photon Workshop, select the Mono 4 configuration and the appropriate documented resin profile; the software name alone does not supply exposure settings.
Anycubic Photon Mono 4 has the following documented listed release film: FEP. The same configuration lists build volume as 153.4 × 87 × 165 mm. Use the exact model’s consumable designation when checking a replacement tank, release film or other resin-side component. A general resin-printer label does not establish fit across generations. Retain any orientation or installation warning in the linked manufacturer instructions; the existence of a replacement part is not permission to alter the documented assembly method.
Anycubic Photon Mono 4 has the following documented manufacturer slicer: Photon Workshop. The same configuration lists build volume as 153.4 × 87 × 165 mm. Use the named software and transfer route for the actual configuration documented here. Sending a file, preparing a sliced job and controlling the device are different steps; availability of one route does not confirm every other function. Check the manufacturer’s version and interface conditions before moving a workflow from a neighboring model or an older installation.
Exact product identity
Product identifiers in official records
GTINs, UPCs, manufacturer SKUs and model codes can identify different colors, configurations or bundles. Only identifiers stated in official records are shown; an unpublished ASIN is not inferred.
| Identifier | Exact value | Variant or bundle | Market | Source and review |
|---|---|---|---|---|
| Manufacturer product name | Photon Mono 4 | Model level | United States | Anycubic · store.anycubic.comAnycubic Photon Mono 4 — Model identity · |