3D printers · Device guides
Page 3 of 5, covering published records 41–60. This section is limited to published 3D printers models and tasks. Find model profiles, comparisons, compatibility checks, maintenance instructions, troubleshooting and app guidance.
Page 3ELEGOO
Mars 5 Ultra lists a 7-inch 9K monochrome LCD with 18 μm XY pixel size and Wi-Fi/USB transfer. Its build volume is 153.36 × 77.76 × 165 mm. Keep the Ultra profile selected instead of assuming a Mars 5 project has the same usable rectangle.
ELEGOO
Mars 5’s specification names a 6.6-inch 4K monochrome LCD and 35 μm XY pixel size, with a 143.43 × 89.6 × 150 mm build volume. The pixel figure describes the exposure display, not a measured dimensional-accuracy guarantee for a finished part.
ELEGOO
ELEGOO lists the Neptune 3 Pro’s maximum operating envelope, including rack and tray, as 475 × 580 × 725 mm. Its 225 × 225 × 280 mm build volume is a different measurement. Use the operating figure when beginning the desk-space check.
ELEGOO
Do not size a workbench from the Neptune 4 Max build volume alone. ELEGOO lists a 420 × 420 × 480 mm printing volume, but a 658 × 950 × 960 mm maximum activity envelope including the rack and tray. The moving-machine envelope is the more relevant starting point for planning space.
ELEGOO
For Neptune 4 Plus, ELEGOO recommends using ABS and ASA with a printer enclosure. The 300 °C nozzle specification does not remove that condition. Its documented build volume is 320 × 320 × 385 mm, so enclosure selection also needs the actual printer installation dimensions—not just that print envelope.
ELEGOO
The Neptune 4 Pro specification lists 225 × 225 × 265 mm build space, 8.9 kg net weight and LAN/USB transfer. Keep the Pro model identity attached to the setup; matching build dimensions elsewhere in the Neptune range do not prove identical hardware or parts.
ELEGOO
The Neptune 4 table lists LAN and USB transfer and a 475 × 550 × 735 mm maximum operating envelope including rack and tray. Confirm the listed connection method and activity space before treating a family-level Neptune guide as a complete setup plan.
ELEGOO
OrangeStorm Giga’s published maximum operating envelope is 1,224 × 1,520 × 1,570 mm and its net weight is 104 kg. Those installation figures deserve attention before the 800 × 800 × 1000 mm build volume: this is not a location check that can be done from the print size alone.
ELEGOO
Saturn 4 Ultra 16K lists a 211.68 × 118.37 × 220 mm build volume and 14 × 19 μm XY pixel size on a 10-inch 16K monochrome LCD. ELEGOO also advertises a 30 °C resin-heating target. Keep the screen, print-space and heating claims separate.
ELEGOO
This Saturn 4 Ultra specification lists 218.88 × 122.88 × 220 mm build space, 19 × 24 μm XY pixel size and Wi-Fi/USB. It is not the separately named Saturn 4 Ultra 16K configuration; keep the exact version attached to a profile or parts search.
ELEGOO
The Saturn 4 specification gives XY pixel dimensions of 19 × 24 μm, not one interchangeable pixel-size number. Its print volume is 218.88 × 122.88 × 220 mm and its listed connectivity is USB. Preserve the complete model and both pixel dimensions when comparing specifications.
ELEGOO
For the U.S. evidence set, the first-generation Centauri Carbon has a 256 × 256 × 256 mm build volume, a 320 °C nozzle limit, a 110 °C bed limit and a 0.4 mm brass-hardened steel nozzle. ELEGOO lists reinforced and standard filament families, but the filament waste bin is not included and Centauri Carbon 2 part interchangeability is not established.
Prusa
The MK4 handbook lists a 250 × 210 × 220 mm build volume, an installed 0.4 mm nozzle and 1.75 mm filament. Its 420 mm depth is explicitly measured with the bed centered, so do not treat that figure as a complete operating-clearance specification.
Prusa
The Original Prusa XL handbook specifies a 360 × 360 × 360 mm print volume and covers assembled, semi-assembled, single-tool and multi-tool machines. The XL name alone therefore does not identify the tool configuration of a particular order or used unit.
Prusa
Prusa describes this CORE One L Critical Infrastructure configuration as having no Wi-Fi slot or related circuitry. That is a specific hardware distinction, not independent proof of complete network isolation or compliance with a particular organization’s security policy.
Prusa
The CORE One L handbook gives a 300 × 300 × 330 mm build volume. Its physical width is 469 mm, height 635 mm and depth 521 mm with the door closed. Use the first set to assess the part and the second to plan where the printer can go.
Prusa
The CORE One L+ INDX specification gives 298 × 275 × 330 mm with INDX. Installing the optional Advanced Filtration System requires an extra 70 mm of depth. The 1080p night-vision camera is included, but installing it is optional.
Prusa
The CORE One L+ product specification lists a standard hotend limit of 290 °C. Reaching up to 400 °C requires the optional HT Hotend upgrade. Its 300 × 300 × 330 mm build volume is separate from the machine footprint and must not be substituted for an INDX configuration specification.
Prusa
For the original CORE One, Prusa’s handbook lists 555 mm depth with the door closed and 555 mm height. These are physical measurements, not build-volume dimensions. The same handbook describes an enclosed chamber that can reach up to 55 °C.
Prusa
For CORE One+ Gen2 INDX, the published build volume is 248 × 205 × 270 mm. Use that configuration-specific figure when checking a part; do not carry over the dimensions of a non-INDX CORE One+ profile.
