3D printers · Device guides
Page 2 of 5, covering published records 21–40. This section is limited to published 3D printers models and tasks. Find model profiles, comparisons, compatibility checks, maintenance instructions, troubleshooting and app guidance.
Page 2Bambu Lab
The U.S. H2S record confirms a 340 × 320 × 340 mm CoreXY single-nozzle printer with a 350 °C hotend, 120 °C bed and 65 °C chamber. It supports first-generation AMS, AMS 2 Pro and AMS HT but not AMS lite; a configured laser edition supports 10 W, not 40 W. Maximum power is Unknown because Bambu Lab's TDS and FAQ conflict.
Bambu Lab
The U.S. P1S page documents a 256 × 256 × 256 mm enclosed printer with an all-metal hotend, included 0.4 mm stainless-steel nozzle, 300 °C hotend maximum and 100 °C bed maximum. It labels common polymers ideal and PA/PC capable, but warns against fiber-reinforced filament before an extruder and hotend upgrade.
Bambu Lab
The P2S offers a listed build volume of 256 × 256 × 256 mm, with a 0.4 mm default nozzle. Its maximum nozzle and heatbed temperatures are 300 °C and 110 °C respectively. Those specifications describe the P2S itself; they do not establish interchangeability with another P-series printer.
Bambu Lab
The X2D has different working envelopes: Bambu lists 256 × 256 × 260 mm for the left nozzle and 235.5 × 256 × 256 mm when both nozzles are used. Plan a supported part against the dual-nozzle figure rather than assuming the larger single-nozzle envelope remains available.
Creality
Creality’s V3 KE column specifies USB-drive/WLAN transfer and Creality OS (Klipper), with a 220 × 220 × 240 mm build volume. Check those KE-specific entries before following a guide written for another Ender-3 V3.
Creality
The Ender-3 V3 SE comparison lists SD-card transfer and Marlin, with a 260 °C nozzle limit. Those are SE entries; do not assume the KE’s transfer or firmware description applies simply because both printers share the V3 name.
Creality
The Ender-3 V4 Combo table lists 838 × 396 × 456 mm Combo dimensions and explicitly says flexible TPU is not compatible with CFS. Plan the complete combination’s location and the intended feed path, rather than checking only the printer’s 220 × 220 × 235 mm build volume.
Creality
The Ender-5 Max specification gives a 400 × 400 × 400 mm build volume and a 649 × 721 × 850 mm printer body. Before selecting it for a large part, verify both the part’s fit and the location for the much larger machine; the camera is listed as optional.
Creality
The K1 Max specification combines a 300 × 300 × 300 mm build volume with Wi-Fi and RJ45 Ethernet. Its machine dimensions are 435 × 462 × 526 mm. A larger printable cube and a wired port are separate reasons to check the fit of a proposed setup.
Creality
The K1 comparison specifies 220 × 220 × 250 mm build space and a 355 × 355 × 480 mm printer body. Its network listing is Wi-Fi. Keep these figures separate from K1 Max and separately named later configurations.
Creality
The K1C 2025 handbook lists 220 × 220 × 250 mm build dimensions, a 355 × 355 × 482 mm body and 12.4 kg machine weight. Keep “2025” in the documentation match instead of assuming an earlier K1C guide describes every detail of this edition.
Creality
U.S. specifications list a 350 × 350 × 350 mm build volume for K2 Plus. CFS is a separate configuration choice: the product options include the printer alone and bundles with 1, 2 or 4 CFS units. The system can reach 16 colors, but the general filament guide prohibits feeding TPU through CFS.
Creality
The K2 Pro Combo is listed as a K2 Pro plus one CFS. The printer has a 300 × 300 × 300 mm build volume and 445 × 477 × 573 mm product dimensions. The printer’s outer dimensions should not be read as the footprint of every possible Combo arrangement.
Creality
The specification used here explicitly names K2 SE 4C. It lists four filament slots and a 220 × 215 × 245 mm build volume. Apply those figures to that documented configuration; a listing shortened to “K2 SE” still needs a package check.
Creality
Creality explicitly lists a K2 option without CFS. Its published build volume is 260 × 260 × 260 mm, while the machine dimensions are 404 × 436 × 545 mm. Confirm both the package and the space requirement rather than using the K2 name alone.
Creality
Creality describes i7 Nano Combo as the i7 printer plus CFS Nano. It is a bundle distinction, not evidence of a smaller i7 printer: the documented i7 build volume remains 260 × 260 × 255 mm. Multiple CFS Nano units are explicitly not supported.
Creality
The SPARKX i7 Color Combo is listed as the i7 printer plus CFS Lite. The printer specification gives 260 × 260 × 255 mm build volume. Separate the printer identity from the material-system bundle when comparing i7 listings.
ELEGOO
ELEGOO states that CANVAS is sold separately for Centauri 2. The printer specification lists CoreXY motion, a 256 × 256 × 256 mm build volume and a 350 °C nozzle limit. Do not treat a CANVAS-equipped product image as the contents of the standard printer package.
ELEGOO
Centauri Carbon 2 is described as an enclosed printer with a controlled grille, a 350 °C nozzle limit and a 110 °C bed limit. The enclosure description should not be rewritten as an independently verified active chamber-heating specification.
ELEGOO
The Jupiter 2 specification lists 302 × 162 × 300 mm print space, 20 × 26 μm XY pixel size and a 30 °C resin-heating target. ELEGOO names SatelLite in its ecosystem and describes Wi-Fi cluster printing. These are manufacturer claims, not a measured batch-output result.
